Types THA 85 ºC and THAS 105 ºC, Thinpack, Aluminum Electrolytic Capacitor
Thin profile, offers the highest energy density available in aluminum electrolytic technology
Its 85 ºC THA Series Thinpack capacitors are only 8.2mm thick, and 9mm for the 105 ºC THAS Series. This is comparable in height to V-chip electrolytics, tantalums and board-mounted axials, yet offer much higher bulk-storage energy density. A single THA/THAS capacitor can replace an array of SMT, axial or radial aluminum electrolytic or solid tantalum capacitance arrays. That substitution can allow engineers to design smaller products with simplified assembly and higher reliability.
The THA/THAS Series design is radically new, yet based on CDE’s 20+ years of experience with MIL-grade flat electrolytics. Reengineered to be thinner and more cost effective, it is a good fit for many of today’s high-performance electronics. Unlike traditional cylindrical electrolytics, a THA/THAS capacitor has a sealed, laser welded aluminum case that eliminates the need for space wasting end seal gaskets. The design includes a valve to vent hydrogen gas, reducing swelling by relieving internal pressure.
Highlights
- THA Thin profile, 8.2 mm thin
- THAS Thin profile, 9 mm thin
- Very high energy density
- THA 5000 hr life @ 85 ºC
- THAS 5000 hr life @ 105 ºC
- REACH and RoHS Compliant
Presentation: THA and THAS, Thinpack, Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitor Redesign Saves Space
(As seen in September 2017 Electronic Products Magazine.)
Applications Include:
Tablets, laptops, specialized instruments, LED driver modules, compact power supplies, drones and RPV's, set-top boxes, narrow, 1U rack-mounted devices, video monitors, solid state drives, displays and security systems.
Find a Rep Find a Distributor
New Products
-
Released Mar, 2024
3 CELL DSF & DGH
Three-cell devices offer greater energy potential and power output than single or dual-cell parts in standard PCB layouts
3-cell DSF & DGH capacitors provide very fast power discharge that cannot be matched by conventional capacitors or batteries. That large capacity makes it possible to support brief power interruptions, supplement batteries, or even be used in place of batteries in many applications.
-
Released Nov, 2023
TYPE MXT, X2, EMI/RFI Suppression Capacitors, Harsh Environment
Type MXT Series Metallized Polypropylene Film Capacitor, designed to suppress conducted electromagnetic/radio frequency interference (EMI/RFI) at a circuit’s power input. These capacitors are perfect for use in harsh environments having met the demanding 85/85 THB (Temperature, Humidity, Bias) test requirements. Class X2 capacitors, like the MXT, are typically connected across the AC input to prevent interference from spreading through power lines or other devices on the same circuit.
-
Released Sep, 2023
Y2 Class Interference Suppression Capacitors Meet 2,000-Hour 85/85 THB Tests, AEC-Q200
Type MYH series of Y2, EMI/RFI suppression capacitors are designed for harsh environments. The MYH series is AEC-Q200 qualified, meets a 2,000-hour THB (Temperature, Humidity, Bias) life test, and has applications in motors, AMR (Automated Meter Readers), UPS, power supplies, charging systems, and appliances. These Y2, line-to-ground capacitors filter out electromagnetic noise and have multiple international safety agency approvals.