Flat Aluminum Electrolytic Capacitors with Welded Seals Offer 5,000 Hour Life at 125 °C, Rugged Design
Type MLSG series of Flatpack is a ruggedized flat aluminum electrolytic capacitor. This series targets compact power supply applications in military and aerospace, as well as other critical systems. Design enhancements and a new electrolyte push the MLSG to nearly double the operating life of its predecessor, at no added cost. Two principal package profiles are offered in this technology, the MLSG Flatpack which measures just 0.5” thick and 1.75” wide and the MLSG Slimpack measuring 0.5” thick by 1.00” wide, both offered in length increments of, 1.5”, 2.0”, 2.5” or 3.0”.
A wide range of standard capacitance values from 220 µF to 24,000 µF are available, with voltage ratings up to 250 Vdc. The unique flat package design does more than save space. It is easily cooled, and can offer unique flexibility in ganging two or more devices in ways that conventional electrolytics can’t.
Highlights
MLSG Flatpack | MLSG Slimpack |
---|---|
• Longest life | • Slim profile of 1.0" by 0.5" |
• Withstands more than 80,000 feet altitude | • Withstands more than 80,000 feet altitude |
• Stainless steel case | • 80g vibration |
• Type HV up to 50g | • Stainless steel case |
• Type HR, high reliability | • Type HR, high reliability burn-in |
• DC life test to 5000 hrs |
Radar, military and commercial aircraft power supplies, mission critical systems.
Three-cell devices offer greater energy potential and power output than single or dual-cell parts in standard PCB layouts
3-cell DSF & DGH capacitors provide very fast power discharge that cannot be matched by conventional capacitors or batteries. That large capacity makes it possible to support brief power interruptions, supplement batteries, or even be used in place of batteries in many applications.
Type MXT Series Metallized Polypropylene Film Capacitor, designed to suppress conducted electromagnetic/radio frequency interference (EMI/RFI) at a circuit’s power input. These capacitors are perfect for use in harsh environments having met the demanding 85/85 THB (Temperature, Humidity, Bias) test requirements. Class X2 capacitors, like the MXT, are typically connected across the AC input to prevent interference from spreading through power lines or other devices on the same circuit.
Type MYH series of Y2, EMI/RFI suppression capacitors are designed for harsh environments. The MYH series is AEC-Q200 qualified, meets a 2,000-hour THB (Temperature, Humidity, Bias) life test, and has applications in motors, AMR (Automated Meter Readers), UPS, power supplies, charging systems, and appliances. These Y2, line-to-ground capacitors filter out electromagnetic noise and have multiple international safety agency approvals.