Cornell Dubilier Expands Capabilities in High Current AC Harmonic Filter Capacitors
The series improvements include UL recognized construction and an internal pressure interrupter system that has passed the rigors of UL testing to ensure fail-open performance under high current fault conditions.
CDE has upgraded the PC series of oil filled polypropylene capacitors with 85 Ampere RMS ratings and numerous other enhancements. The series improvements include UL recognized construction and an internal pressure interrupter system that has passed the rigors of UL testing to ensure fail-open performance under high current fault conditions. The higher current ratings improve the capacitor’s ability to handle the high levels of harmonic content encountered in inverter AC input and output filtering applications.
The series is typically networked with inductors to filter out undesirable harmonics in both single phase and three phase AC power systems. As a two-terminal capacitor device, multiple PC series capacitors can be connected in delta or wye configurations to achieve the reactive power and harmonic tuning needed to filter out the unwanted frequencies. The presence of multiple harmonics puts additional stress on capacitors in the form of self-heating. The PC series is designed with robust terminations and low equivalent series resistance (ESR), to minimize heating. The service life objective of the PC series is 60,000 hours when operated at full rated voltage and a case hot spot of 70 °C.
The PC series is offered with capacitance ratings ranging from 20 µF to 125 µF at voltage ratings from 300 Vac to 700 Vac. Case diameters vary from 63.5 to up to 116mm. Custom capacitance and voltage ratings, sizes and performance characteristics are also available. Specific application conditions, especially harmonic content profiles, are needed to properly size the capacitors for peak performance.
The PC series enhancements add capabilities to the broad range of AC harmonic filtering solutions offered by the company. These include three phase cylindrical and welded rectangular cases used in large inverter systems. Cornell Dubilier also offers rack-mount systems, designed and fabricated in-house, to allow for easy integration of capacitor banks into the mechanical design of a filter system.
Applications Include:
UPS, AC Tuned filters (harmonic reduction), AC Input filtering, Line conditioning, Noise suppression, Wind turbine motoring, Variable speed drives
Find a Rep Find a Distributor
New Products
-
Released Mar, 2024
3 CELL DSF & DGH
Three-cell devices offer greater energy potential and power output than single or dual-cell parts in standard PCB layouts
3-cell DSF & DGH capacitors provide very fast power discharge that cannot be matched by conventional capacitors or batteries. That large capacity makes it possible to support brief power interruptions, supplement batteries, or even be used in place of batteries in many applications.
-
Released Nov, 2023
TYPE MXT, X2, EMI/RFI Suppression Capacitors, Harsh Environment
Type MXT Series Metallized Polypropylene Film Capacitor, designed to suppress conducted electromagnetic/radio frequency interference (EMI/RFI) at a circuit’s power input. These capacitors are perfect for use in harsh environments having met the demanding 85/85 THB (Temperature, Humidity, Bias) test requirements. Class X2 capacitors, like the MXT, are typically connected across the AC input to prevent interference from spreading through power lines or other devices on the same circuit.
-
Released Sep, 2023
Y2 Class Interference Suppression Capacitors Meet 2,000-Hour 85/85 THB Tests, AEC-Q200
Type MYH series of Y2, EMI/RFI suppression capacitors are designed for harsh environments. The MYH series is AEC-Q200 qualified, meets a 2,000-hour THB (Temperature, Humidity, Bias) life test, and has applications in motors, AMR (Automated Meter Readers), UPS, power supplies, charging systems, and appliances. These Y2, line-to-ground capacitors filter out electromagnetic noise and have multiple international safety agency approvals.