Cornell Dubilier Increases Snap-in Aluminum Electrolytic Capacitor Voltages to 600 Vdc
CDE has expanded its signature series of 380LX and 381LX aluminum electrolytic capacitors to include voltages up to 600 Vdc.
The 380LX and 381LX snap-in series are among the industry’s top performers with a published load life of 3,000 hrs. when tested at rated voltage and ripple current at rated temperature. The 380LX series is designed for 85 °C operation, while the 381LX series meets the same load life at 105 °C. These components demonstrate exceptional life in the latest inverter circuits for renewable energy, UPS systems, battery chargers, motor drives, welders, and other applications that require the highest performance components to improve system reliability.
Newly added capacitance values in the range of 150 µF to 330 µF are offered at 550 and 600 Vdc in the 380LX series and 140 µF to 340 µF at 500, 550, and 600 Vdc in the 381LX series. Developed at our technology center in Liberty, SC, these new ratings are offered with enhanced ripple current capability, up to 3.7A at full-rated conditions. Our latest advances in electrolyte development, materials, and processing technology make higher voltage ratings and excellent performance possible.
500, 550 and 600 Vdc ratings are now available
Applications Include:
Renewable energy, switching power supply input and output circuits, UPS systems, battery chargers, motor drives, welders, and other applications that require the highest performance components to improve system reliability.
Find a Rep Find a Distributor
New Products
-
Released Aug, 2025
Type BLS, 125°C DC Link Capacitors for Harsh Environments
85°C / 85% RH , 2000h @ Vr, AEC-Q200 Qualified
Type BLS DC Link capacitors use the most advanced construction and technology to meet the challenges of harsh environments with operating temperatures to 125°C. Tested for 2,000-hour at 85°C / 85% relative humidity with rated voltage applied (100% greater than competitive THB test life). The series is qualified to automotive-grade electrical and mechanical testing per standard AEC-Q200.
-
Released Aug, 2024
Type QAS, Arc Suppressor/Snubber Network
Type QAS will extend the operating life of electronic and electro-mechanical devices by reducing and/or eliminating the electrical arcing, noise, and EMF. These electrical conditions often cause early failures in relays, switch contacts, and solid-state components such as SCRs and TRIACs.
-
Released Mar, 2024
3 CELL DSF & DGH
Three-cell devices offer greater energy potential and power output than single or dual-cell parts in standard PCB layouts
3-cell DSF & DGH capacitors provide very fast power discharge that cannot be matched by conventional capacitors or batteries. That large capacity makes it possible to support brief power interruptions, supplement batteries, or even be used in place of batteries in many applications.