Liberty, SC– First introduced in 2018, Cornell Dubilier Electronics, Inc. (CDE) has made significant design tweaks to their groundbreaking THA and THAS Series Thinpack capacitors. The product updates raise the rated life to 5,000 hours, a 66% increase over the first-generation devices. The key strength of the series is still high energy density. The 85 ºC THA Series Thinpack capacitors are only 8.2mm thick, and 9mm for the 105 ºC THAS Series. While of similar height to V-chip electrolytics, tantalums, and board-mounted axials, THA and THAS offer much higher bulk-storage capability. For example, a single THA/THAS capacitor can replace an entire board full of SMT, axial or radial aluminum electrolytic or solid tantalum capacitance arrays. The upgrade to a 5,000-hour rating expands the potential range of applications to longer life commercial and MIL/Aero devices. All THA/THAS capacitors sold after January 1, 2020, will meet the new performance specifications. Pricing is unchanged.
THA/THAS Series capacitors are thinner and more cost-effective than most alternative technologies. Unlike traditional cylindrical electrolytics, THA/THAS capacitors have sealed, laser-welded aluminum cases to eliminate the need for space-wasting end seal gaskets. Compared to cylindricals, flat THA and THAS capacitors are up to 60% smaller by volume. The design includes a valve to vent hydrogen gas buildups that may otherwise cause pressure-related swelling. The 105°C rated THAS Series adds a 0.38mm form-fitting stainless-steel sleeve to further prevent swelling at the highest temperatures.
Compared to a bank of SMT or axial aluminum electrolytic capacitors comprising similar total values, THA/THAS capacitors can offer significant cost, weight, and space savings. The benefits include requiring about 70% less board space than alternatives. Even where size or weight reduction is not essential, the smaller part and connection count improves overall circuit reliability (one part vs. many). The THA is rated at 5,000 hr. life @ 85°C; and the THAS is rated at 5,000 hr. life @ 105°C. Values range from 140 µF at 450 Vdc to 18,000 µF at 10 Vdc, with 72 capacitance/voltage combinations available for each series.
Potential applications include any circuits that require high capacitance bulk storage and filtering. These include: tablets, laptops, instrumentation, commercial-grade LED driver modules, compact power supplies, drones and RPVs, set-top boxes, 1U rack-mounted devices, and other high-performance, low-profile devices.
CDE’s THA and THAS Thinpack aluminum electrolytic capacitors are available now from CDE’s franchised distributors. For inquiries, contact: Chris Tucker, Product Marketing Manager, email@example.com (864) 843-2277 ext. 2557. For more information on this series visit: cde.com/new-product/tha-thas
Since its founding in 1909, CDE has been dedicated to advancing capacitor technology for new applications. The company combines innovative products with engineering expertise to provide reliable component solutions for inverters, wind and solar power, electric vehicles, power supplies, motor drives, HVAC, motors, welding, aerospace, telecom, medical equipment, and UPS systems. A global company, Cornell Dubilier has ISO-9001 certified manufacturing and distribution facilities in Liberty, SC; New Bedford, MA; Mexicali, Mexico; and Hong Kong.