Latest Flat Aluminum Electrolytic Capacitors withstand 150 °C and 80g Vibration
With a life rating of 3,000 hours at 150 °C and vibration withstand of up to 80g, the series is poised to replace banks of costly wet tantalum capacitors.
Able to withstand operating temperatures from –55 °C to 150 °C, NHR capacitors are constructed with rectangular stainless-steel cases and laser-welded covers that prevent dry-out. These capacitors have a 3,000-hour life at full-rated conditions and withstand up to 80g vibration to meet the most demanding military, aerospace, industrial, and down-hole applications.
Type NHR is a spin-off of the Flatpack series of capacitors that have 30 years of proven applications in military and aerospace. The NHR Flatpack technology offers exceedingly long life at high temperature for critical applications that previously have been the domain of wet-tantalum capacitors. Their high-capacitance density at high voltage and temperature solves many of the problems faced by engineers designing circuits for extreme environments. The series is designed to replace large series-parallel banks of wet tantalum capacitors with fewer components, saving our customers valuable space, weight, and cost.
Potential applications include any high-performance circuits that require large capacitance bulk storage and filtering at high temperature. These include power supplies and inverters for avionics, military electronics, and such energy industry applications as down-hole recording devices.
HIGHLIGHTS
• Alternative to banks of wet tantalum capacitors
• No voltage derating required at 150 °C
• Rugged, stainless steel case
• Near hermetic seal, prevents dry-out
• Just 0.5” in height, by 1.0” wide (available in 4 lengths)
• High capacitance retention at low voltage, -55 °C
Applications Include:
Avionics, Automotive, Down-Hole, Industrial Inverters
Find a Rep Find a Distributor
New Products
-
Released Aug, 2025
Type BLS, 125°C DC Link Capacitors for Harsh Environments
85°C / 85% RH , 2000h @ Vr, AEC-Q200 Qualified
Type BLS DC Link capacitors use the most advanced construction and technology to meet the challenges of harsh environments with operating temperatures to 125°C. Tested for 2,000-hour at 85°C / 85% relative humidity with rated voltage applied (100% greater than competitive THB test life). The series is qualified to automotive-grade electrical and mechanical testing per standard AEC-Q200.
-
Released Aug, 2024
Type QAS, Arc Suppressor/Snubber Network
Type QAS will extend the operating life of electronic and electro-mechanical devices by reducing and/or eliminating the electrical arcing, noise, and EMF. These electrical conditions often cause early failures in relays, switch contacts, and solid-state components such as SCRs and TRIACs.
-
Released Mar, 2024
3 CELL DSF & DGH
Three-cell devices offer greater energy potential and power output than single or dual-cell parts in standard PCB layouts
3-cell DSF & DGH capacitors provide very fast power discharge that cannot be matched by conventional capacitors or batteries. That large capacity makes it possible to support brief power interruptions, supplement batteries, or even be used in place of batteries in many applications.